Three-Dimensional Polar Perovskites for Highly Sensitive Self-Driven X-Ray Detection.

Three-dimensional (3D) organic-inorganic hybrid perovskites (OIHPs) have achieved tremendous success in direct X-ray detection due to their high absorption coefficient and excellent carrier transport. However, owing to the centrosymmetry of classic 3D structures, these reported X-ray detectors mostly require external electrical fields to run, resulting in bulky overall circuitry, high energy consumption, and operational instability. Herein, we first report the unprecedented radiation photovoltage in 3D OIHP for efficient self-driven X-ray detection. Specifically, the 3D polar OIHP MhyPbBr3 (1, Mhy=methylhydrazine) shows an intrinsic radiation photovoltage (0.47 V) and large mobility-lifetime product (1.1×10-3  cm2 V-1 ) under X-ray irradiation. Strikingly, these excellent physical characteristics endow 1 with sensitive self-driven X-ray detection performance, showing a considerable sensitivity of 220 µC Gy-1 cm-2 , which surpasses those of most self-driven X-ray detectors. This work first explores highly sensitive self-driven X-ray detection in 3D polar OIHPs, shedding light on future practical applications.

Regulating Circularly Polarized Light Detection via Polar-Phase Transition in Alternating Chiral-Achiral Cations Intercalation-Type Hybrid Perovskites.

Circularly polarized light (CPL) detection has wide applications in many fields, where the anisotropy factor (gIph ) is an important indicator to characterize the CPL detection performance. So far, many materials with high gIph have been reported, however, the exploration of the regulation of gIph is still in its infancy. Herein, two novel alternating chiral-achiral cations intercalation-type chiral hybrid perovskites (CHPs), named (R/S-1-phenylpropylamine)(propylamine)PbBr4 (1-R/S), exhibit above room-temperature (RT) polar-phase transition, which greatly regulates the gIph value. The gIph of 1-R is 0.04 in high-temperature phase chiral non-polar (P21 21 21 ) by applying 5 V bias, interestingly, with the temperature decrease, the gIph value in low-temperature phase chiral polar (P21 ) gradually increases (0.22@360K, 0.40@340K, 0.47@320K), and finally reaches a maximum of 0.5 at RT. Such value is not only the highest among 2D CHPs to date, but presents a 12.5-fold amplification compared with 0.04. Further, this rare phenomenon should be attributed to the built-in electric field induced by the polar photovoltaic effect, which sheds light on further obtaining CHPs with large gIph .

Circularly Polarized Light-Dependent Pyro-Phototronic Effect from 2D Chiral-Polar Double Perovskites.

Chiral hybrid perovskites combine the advantages of chiral materials and halide perovskites, offering an ideal platform for the design of circularly polarized light (CPL) detectors. The pyro-phototronic effect, as a special mechanism of the photoexcited pyroelectric signal, can significantly improve the performance of photodetectors, whereas it remains a great challenge to achieve pyroelectricity-based CPL detection. In this work, the chiroptical phenomena and the pyro-phototronic effect are combined in chiral-polar perovskites to achieve unprecedented pyroelectric-based CPL detection. Two novel two-dimensional (2D) lead-free chiral-polar double perovskites, S/R-[(4-aminophenyl)ethylamine]2AgBiI8·0.5H2O, are successfully designed and synthesized by introducing chiral organic ligands into metal halide frameworks. Strikingly, the photoresponse is substantially boosted with the support of the pyro-phototronic effect, showing an increased pyro-phototronic current that is 40 times greater than the photovoltaic current. Furthermore, the pyroelectric-based detector possesses excellent CPL detection capacity to distinguish different polarization states of CPL photons, which achieve an impressive glph of up to 0.27 at zero bias. This study provides a brand new process for CPL detection by utilizing the pyro-phototronic effect in chiral-polar perovskites, which opens a new avenue for chiral materials in optoelectronic applications.

Realization of Passive X-Ray Detection with a Low Detection Limit in Dion-Jacobson Halide Hybrid Perovskite.

Halide hybrid perovskites are a kind of intriguing contenders for X-ray detection, and their low detection limits (LoDs) have played a crucial part in X-ray safety inspection and medical examination. However, there is still a significant challenge in manufacturing perovskite X-ray detectors with low LoDs. Herein, attributed to the bulk photovoltaic effect (BPVE) of a Dion-Jacobson (DJ) type 2D halide hybrid perovskite polar structure (3-methylaminopropylamine)PbBr4 (1), self-powered X-ray detection with low detection limit is successfully realized. Specifically, the crystal-based detector of 1 exhibits a low dark current at zero bias, which reduces the noise current (0.34 pA), leading to a low detection limit (58.3 nGyair s-1 ) which is two orders of magnitude lower than that of under external voltage bias. The combination of BPVE and LoDs of halide hybrid perovskite provides an efficient strategy to achieve passive X-ray detection with low doses.

Visible-Photoactive Perovskite Ferroelectric-Driven Self-Powered Gas Detection.

Chemiresistive sensing has been regarded as the key monitoring technique, while classic oxide gas detection devices always need an external power supply. In contrast, the bulk photovoltage of photoferroelectric materials could provide a controllable power source, holding a bright future in self-powered gas sensing. Herein, we present a new photoferroelectric ([n-pentylaminium]2[ethylammonium]2Pb3I10, 1), which possesses large spontaneous polarization (∼4.8 µC/cm2) and prominent visible-photoactive behaviors. Emphatically, driven by the bulk photovoltaic effect, 1 enables excellent self-powered sensing responses for NO2 at room temperature, including extremely fast response/recovery speeds (0.15/0.16 min) and high sensitivity (0.03 ppm-1). Such figures of merit are superior to those of typical inorganic systems (e.g., ZnO) using an external power supply. Theoretical calculations and in situ diffuse reflectance infrared Fourier transform spectroscopy measurements confirm the great selectivity of 1 for NO2. As far as we know, this is the first realization of ferroelectricity-driven self-powered gas detection. Our work sheds light on the self-powered sensing systems and provides a promising way to broaden the functionalities of photoferroelectrics.

Weak X-Ray to Visible Lights Detection Enabled by a 2D Multilayered Lead Iodide Perovskite with Iodine-Substituted Spacer.

Broadband photodetectors (PDs) with low detection limits hold significant importance to next-generation optoelectronic devices. However, simultaneously detecting broadband (i.e., X-ray to visible regimes) and weak lights in a single semiconducting material remains highly challenging. Here, by alloying iodine-substituted short-chain cations into the 3D FAPbI3 (FA = formamidine), a new 2D bilayered lead iodide hybrid perovskite, (2IPA)2 FAPb2 I7 (1, 2IPA = 2-iodopropylammonium), that enables addressing this challenge is reported. Such a 2D multilayered structure and lead iodide composition jointly endow 1 with a minimized dark current (6.04 pA), excellent electrical property, and narrow bandgap (2.03 eV), which further gives it great potential for detecting broadband weak lights. Consequently, its high-quality single crystal PDs exhibit remarkable photoresponses to weak ultraviolet-visible lights (377-637 nm) at several tens of nW cm-2 with high responsivities (>102  mA W-1 ) and significant detectivities (>1012 Jones). Moreover, 1 has an excellent X-ray detection performance with a high sensitivity of 438 µC Gy-1 cm-2 and an ultralow detection limit of 20 nGy s-1 . These exceptional attributes make 1 a promising material for broadband weak lights detection, which also sheds light on future explorations of high-performance PDs based on 2D hybrid perovskites.

Circular polarized light-dependent anomalous photovoltaic effect from achiral hybrid perovskites.

Circular polarized light-dependent anomalous bulk photovoltaic effect - a steady anomalous photovoltaic current can be manipulated by changing the light helicity, is an increasingly interesting topic in contexts ranging from physics to chemistry. Herein, circular polarized light-dependent anomalous bulk photovoltaic effect is presented in achiral hybrid perovskites, (4-AMP)BiI5 (ABI, 4-AMP is 4-(aminomethyl)piperidinium), breaking conventional realization that it can only happen in chiral species. Achiral hybrid perovskite ABI crystallizes in chiroptical-active asymmetric point group m (Cs), showing an anomalous bulk photovoltaic effect with giant photovoltage of 25 V, as well as strong circular polarized light - sensitive properties. Significantly, conspicuous circular polarized light-dependent anomalous bulk photovoltaic effect is reflected in the large degree of dependence of anomalous bulk photovoltaic effect on left-and right-CPL helicity, which is associated with left and right-handed screw optical axes of ABI. Such degree of dependence is demonstrated by a large asymmetry factor of 0.24, which almost falls around the highest value of hybrid perovskites. These unprecedented results may provide a perspective to develop opto-spintronic functionalities in hybrid perovskites.

Multilayered Alternating-Cations-Intercalation Chiral Hybrid Perovskites with High Circular Polarization Sensitivity.

Multilayered chiral hybrid perovskites are highly desired for highly-sensitive circularly polarized light (CPL) detection rooted in their efficient charge transport and strong chiroptical activity. However, designing multilayered chiral hybrid perovskites remains a huge challenge. Here, through pairing achiral ethylamine (EA)-chiral arylamine in the interlayer space, multilayered chiral alternating cations intercalation-type (ACI) hybrid perovskites (R-/S-PPA) EA2 Pb2 Br7 (PPA = 1-phenylpropylamine) are successfully obtained. Significantly, perovskitizer EA extends the thickness of the quantum well and alternating space cation EA greatly alleviates in-plane tilting distortions of adjacent metal halide octahedra, providing fast channels for in-plane carrier transport. Consequently, single-crystal photodetectors of (R-/S-PPA) EA2 Pb2 Br7 exhibit high circular polarization sensitivity with a large anisotropy factor of 0.3, which falls around the highest value among the layered hybrid perovskites. In addition, a fast responding rate (τr )of 308 µs and a high CPL-detectivity of 8 × 1012 Jones are also presented. This work opens up a new perspective to design multilayered chiral hybrid perovskites for high-sensitive CPL detection.

Chain-to-Layer Dimensionality Engineering of Chiral Hybrid Perovskites to Realize Passive Highly Circular-Polarization-Sensitive Photodetection.

Chiral hybrid perovskites (CHPs), aggregating chirality and favorable semiconducting properties in one, have taken a prominent position in direct circularly polarized light detection (CPL). However, passive high circular polarization sensitivity (gres) photodetection in CHPs is still elusive and challenging. Benefitting from efficient control and turning of carrier transport of CHPs by dimensional engineering, here, we unprecedentedly proposed a chain-to-layer dimensionality engineering to realize high-gres passive photodetection. Two novel 2D layered CHPs (R/S-PPA)EAPbBr4 (2R/2S) (PPA = 1-phenylpropylamine, EA = ethylammonium) are successfully synthesized by alloying an EA cation with small steric hindrance into the chained CHPs (R/S-PPA)PbBr3 (1R/1S). Particularly, compared with the neglectable photoresponse in 1R, the obtained 2R by chain-to-layer dimensionality engineering gives rise to an excellent photoconductivity and robust polar photovoltage effect (PPE) with a giant open-circuit voltage of 2.5 V. Furthermore, such PPE promotes realizing an impressive gres in 2R up to 0.42 at zero bias because of the independent separation of photoexcited carriers, which is the highest value among the reported layered chiral perovskites. This work paves the way for the vigorous development of higher dimensional CHPs and will reveal their applications in the field of passive high-gres CPL detection.

Localized Lattice Expansion of FAPbBr3 to Design a 3D Hybrid Perovskite for Sensitive Near-Infrared Photodetection.

A mixed-cation 3D lead bromide hybrid perovskite (NMDAP)2 FAPb4 Br13 (1, NMDAP2+ = N-methyl-1,3-diaminopropanium, FA+ = formamidinium) is tailored by incorporating the large NMDAP2+ cation with the small FA+ ion into 3D FAPbBr3 . Structurally, the small FA+ ions occupy the prototypical cavities formed by distorted corner-sharing PbBr6 octahedra as in FAPbBr3 , while the bulky NMDAP2+ ions are confined to the expanded lattice which is defined by a new structural motif composed of eight corner-sharing PbBr6 octahedra and four edge-sharing octahedra. This localized lattice expansion from FAPbBr3 creates a new branch of the intriguing 3D hybrid perovskite family, breaking the limits of the conventional Goldschmidt tolerance factor rule. Moreover, a high two-photon absorption (2AP) coefficient of 60.8 cm MW-1 was demonstrated to near-infrared (NIR) 800 nm illumination, enabling sensitive NIR photoresponses with large on/off ratio (≈104 ) as well as favorable stability.

Robust Spin-Dependent Anisotropy of Circularly Polarized Light Detection from Achiral Layered Hybrid Perovskite Ferroelectric Crystals.

Circularly polarized light (CPL) detection has sparked overwhelming research interest for its widespread chiroptoelectronic and spintronic applications. Ferroelectric materials, especially emerging layered hybrid perovskite ferroelectrics, exhibiting striking bulk photovoltaic effect (BPVE) present significant possibilities for CPL detection by a distinctive working concept. Herein, for the first time, we demonstrate the realization of robust angular anisotropy of CPL detection in a new layered hybrid perovskite ferroelectric crystal (CPA)2FAPb2Br7 (1, CPA is chloropropylammonium, FA is formamidinium), which crystallized in an optically active achiral polar point group. Benefiting from the notable spontaneous polarization (5.1 µC/cm2) and excellent semiconducting characteristics, single crystals of 1 exhibit remarkable BPVE under light illumination, with a high current on/off switching ratio (ca. 103). More intriguingly, driven by the angular carrier drift originating from spin-dependent BPVE in optically active ferroelectrics, 1 displays highly sensitive self-powered CPL detection performance, showing a robust angular anisotropy factor up to 0.98, which is far more than those achieved by material intrinsic chirality. This work provides an unprecedented approach for realizing highly sensitive CPL detection, which sheds light on the further design of optically active ferroelectrics for chiral photonic applications.

Rational design of high-quality 2D/3D perovskite heterostructure crystals for record-performance polarization-sensitive photodetection.

Polarization-sensitive photodetection is central to optics applications and has been successfully demonstrated in photodetectors of two-dimensional (2D) materials, such as layered hybrid perovskites; however, achieving high polarization sensitivity in such a photodetector remains extremely challenging. Here, for the first time, we demonstrate a high-performance polarization-sensitive photodetector using single-crystalline 2D/3D perovskite heterostructure, namely, (4-AMP)(MA)2Pb3Br10/MAPbBr3 (MA = methylammonium; 4-AMP = 4-(aminomethyl)piperidinium), which exhibits ultrahigh polarization sensitivity up to 17.6 under self-driven mode. To our knowledge, such a high polarization selectivity has surpassed all of the reported perovskite-based devices, and is comparable to, or even better than, the traditional inorganic heterostructure-based photodetectors. Further studies reveal that the built-in electric field formed at the junction can spatially separate the photogenerated electrons and holes, reducing their recombination rate and thus enhancing the performance for polarization-sensitive photodetection. This work provides a new source of polarization-sensitive materials and insights into designing novel optoelectronic devices.

In Situ Epitaxial Growth of Centimeter-Sized Lead-Free (BA)2CsAgBiBr7/Cs2AgBiBr6 Heterocrystals for Self-Driven X-ray Detection.

Halide perovskite heterocrystals, composed of distinct perovskite single crystals, have generated great interest for both fundamental research and applied device designs. One of the key advantages of using such a heterocrystal is its built-in electric potential, which enhances charge transport and suppresses the noise in the solid-state devices. On the basis of this strategy, high-performance optoelectronic devices (e.g., X-ray detectors) have been successfully demonstrated. However, the toxicity of metal cations (Pb) in those reported heterocrystals hinders their wider applications. Thus, developing lead-free halide perovskite heterocrystals is significant but remains highly challenging. Here, we report a solution-processed in situ heteroepitaxial approach that enables us to create the first lead-free halide perovskite heterocrystal, (BA)2CsAgBiBr7/Cs2AgBiBr6(BA = n-butylammonium), with dimensions of up to 10 × 7 × 6 mm3. The as-grown heterocrystals have high crystalline quality and present near atomically sharp interfaces. More excitingly, the (BA)2CsAgBiBr7/Cs2AgBiBr6 heterogeneous integration allows the formation of a built-in electric potential in the junction, which triggers spontaneous charge separation/transport. Consequently, X-ray detectors using the heterocrystals can operate in a self-driven mode and exhibit an impressive sensitivity (206 µC Gy-1 cm-2) superior to that of the pristine Cs2AgBiBr6 crystal detectors, an ultralow dark current, and operational stability. Our findings provide the first demonstration of lead-free halide perovskite heterocrystals and may open up opportunities for a host of sustainable and miniaturized perovskite optoelectronic devices.

Giant room temperature electrocaloric effect in a layered hybrid perovskite ferroelectric: [(CH3)2CHCH2NH3]2PbCl4.

Electrocaloric effect driven by electric fields displays great potential in realizing highly efficient solid-state refrigeration. Nevertheless, most known electrocaloric materials exhibit relatively poor cooling performance near room temperature, which hinders their further applications. The emerging family of hybrid perovskite ferroelectrics, which exhibits superior structural diversity, large heat exchange and broad property tenability, offers an ideal platform. Herein, we report an exceptionally large electrocaloric effect near room temperature in a designed hybrid perovskite ferroelectric [(CH3)2CHCH2NH3]2PbCl4, which exhibits a sharp first-order phase transition at 302 K, superior spontaneous polarization (>4.8 µC/cm2) and relatively small coercive field (<15 kV/cm). Strikingly, a large isothermal entropy change ΔS of 25.64 J/kg/K and adiabatic temperature change ΔT of 11.06 K under a small electric field ΔE of 29.7 kV/cm at room temperature are achieved, with giant electrocaloric strengths of isothermal ΔS/ΔE of 0.86 J·cm/kg/K/kV and adiabatic ΔT/ΔE of 370 mK·cm/kV, which is larger than those of traditional ferroelectrics. This work presents a general approach to the design of hybrid perovskite ferroelectrics, as well as provides a family of candidate materials with potentially prominent electrocaloric performance for room temperature solid-state refrigeration.

Great Amplification of Circular Polarization Sensitivity via Heterostructure Engineering of a Chiral Two-Dimensional Hybrid Perovskite Crystal with a Three-Dimensional MAPbI3 Crystal.

Chiral hybrid perovskites have brought an unprecedented opportunity for circularly polarized light (CPL) detection. However, the circular polarization sensitivity of such a detector remains extremely low because of the high exciton recombination rate in those single-phase hybrid perovskites. Here, a heterostructure construction strategy is proposed to reduce the electron-hole recombination rate in a chiral hybrid perovskite and achieve CPL detectors with greatly amplified circular polarization sensitivity. A heterostructure crystal, namely, [(R)-MPA]2MAPb2I7/MAPbI3 ((R)-MPA = (R)-methylphenethylamine, MA = methylammonium), has been successfully created by integrating a chiral two-dimensional (2D) perovskite with its three-dimensional counterpart via solution-processed heteroepitaxy. Strikingly, the sharp interface of the as-grown heterostructure crystal facilitates the formation of a built-in electric field, enabling the combined concepts of charge transfer and chirality transfer, which effectively reduces the recombination probability for photogenerated carriers while retaining chiroptical activity of chiral 2D perovskite. Thereby, the resultant CPL detector exhibits significantly amplified circular polarization sensitivity at zero bias with an impressive anisotropy factor up to 0.67, which is about six times higher than that of the single-phase [(R)-MPA]2MAPb2I7 (0.1). As a proof-of-concept, the strategy we presented here enables a novel path to modulate circular polarization sensitivity and will be helpful to design chiral hybrid perovskites for advanced chiroptical devices.

Monolayer-to-Multilayer Dimensionality Reconstruction in a Hybrid Perovskite for Exploring the Bulk Photovoltaic Effect Enables Passive X-ray Detection.

Halide hybrid perovskites are attracting considerable attention as highly promising candidates for directly sensing X-ray radiation, but it is challenging to realize passive X-ray detection without an external power supply. However, the bulk photovoltaic effect (BPVE) in ferroelectrics promotes the independent separation of photoexcited carriers. Herein, by dimensionality reconstruction of a pure-two-dimensional (P-2D) monolayered perovskite (CH3 OC3 H9 N)2 PbBr4 , we obtained a quasi-two-dimensional (Q-2D) ferroelectric (CH3 OC3 H9 N)2 CsPb2 Br7 . Converting P-2D into Q-2D perovskite stimulates a significant BPVE associated with robust ferroelectricity, as well as an enhanced mobility lifetime product. These features show the potential of the first passive X-ray detector based on ferroelectrics with an impressive sensitivity up to 410 µC Gy-1 cm-2 at zero bias, which is even superior to the value of the state-of-the-art α-Se detector operated at relatively high bias.

Bromine-Substitution-Induced High-Tc Two-Dimensional Bilayered Perovskite Photoferroelectric.

High-Curie-temperature (Tc) ferroelectrics have exhibited broad applications in optoelectronic devices. Recently, two-dimensional multilayered perovskite ferroelectrics with excellent photoelectric attributes are attracting increasing interest as new systems of photoferroelectrics. However, the effective tuning of the Tc value of a multilayered perovskite photoferroelectric system still remains a huge challenge. Here, by a halogen substitution strategy to introduce bromine atoms on n-propylamine cations, the hybrid perovskite photoferroelectric (3-bromopropylaminium)2(formamidinium)Pb2Br7 (BFPB) with a high Tc value (348.5 K) was obtained. It is notable that BFPB adopts a two-dimensional bilayered inorganic framework, with tight linking to the organic cation by C-Br···Br-Pb halogen···halogen interactions and N-H···Br hydrogen bonds. Intriguingly, in comparison with the prototypical compound (n-propylaminium)2(formamidinium)Pb2Br7, a remarkable augmentation of 85.2 K in the resulting Tc value of BFPB is clearly observed, which further broadens the temperature range of its application. In combination with the remarkable ferroelectric and semiconducting attributes, the reversible bulk photovoltaic effect was realized in single crystals of BFPB. This finding can not only enhance the hybrid perovskite ferroelectric family but also further promote the photoelectric application of ferroelectrics.

Ferroelectricity-Driven Self-Powered Ultraviolet Photodetection with Strong Polarization Sensitivity in a Two-Dimensional Halide Hybrid Perovskite.

Polarization-sensitive ultraviolet (UV) photodetection is highly indispensable in military and civilian applications and has been demonstrated with various wide-band photodetectors. However, it still remains elusive to achieve the self-powered devices, which can be operated in the absence of external bias. Herein, for the first time, ferroelectricity-driven self-powered photodetection towards polarized UV light was successfully demonstrated in a 2D wide-band gap hybrid ferroelectric (BPA)2 PbBr4 (BPA=3-bromopropylammonium) (1). We found that the prominent spontaneous polarization in 1 results in a bulk photovoltaic effect (BPVE) of 0.85 V, that independently drives photoexcited carriers separation and transport and thus supports self-powered ability. This self-powered detector shows strong polarization sensitivity to linearly polarized UV illumination with a polarization ratio up to 6.8, which is superior to that of previously reported UV-polarized photodetectors (ZnO, GaN, and GeS2 ).

A Potential Sn-Based Hybrid Perovskite Ferroelectric Semiconductor.

Ferroelectric semiconductors, combining semiconduction, spontaneous polarization, and photoinduced excitation, show great promise to enhance the performance of solar cells, pressure sensors, and photodetectors. Particularly, organic-inorganic lead halide perovskite ferroelectrics have been explored for their prominent carrier transport properties and structural tunability. However, a high concentration of toxic Pb is a stumbling block for their further application. Here, we present a lead-free hybrid perovskite semiconductor, (C4H9NH3)2(NH3CH3)2Sn3Br10 (1), which exhibits a large spontaneous polarization of 11.76 µC cm-2 at room temperature. Significantly, 1 presents a spontaneous polar ordering transition, similar to the better-known perovskite ferroelectrics, and exhibits ferroelectric phase transition behaviors. To our best knowledge, 1 is the first example of a Sn-based hybrid perovskite semiconductor featuring ferroelectric performance. Mechanistic studies reveal that such ferroelectricity can be attributable to the synergistic effects of ordering of organic cations and stereochemically active lone-pair electrons inducing distortion of inorganic octahedra. This work provides an effective way to explore "green" ferroelectric semiconductors with potentially enhanced energy conversion efficiency.

Exploiting the Bulk Photovoltaic Effect in a 2D Trilayered Hybrid Ferroelectric for Highly Sensitive Polarized Light Detection.

Polarized light detection is attracting increasing attention for its wide applications ranging from optical switches to high-resolution photodetectors. Two-dimensional (2D) hybrid perovskite-type ferroelectrics combining inherent light polarization dependence of bulk photovoltaic effect (BPVE) with excellent semiconducting performance present significant possibilities. Now, the BPVE-driven highly sensitive polarized light detection in a 2D trilayered hybrid perovskite ferroelectric, (allyammonium)2 (ethylammonium)2 Pb3 Br10 (1), is presented. It shows a superior BPVE with near-band gap photovoltage of ca. 2.5 V and high on/off switching ratio of current (ca. 104 ). Driven by the superior BPVE, 1 exhibits highly sensitive polarized light detection with a polarization ratio as high as ca. 15, which is far more beyond than those of structural anisotropy-based monocomponent devices. This is the first realization of BPVE-driven polarized light detection in hybrid perovskite ferroelectrics.